- 1 programmable crescendo in internal memory
- Additional 3 user crescendos on USB drive
- 1 channel, 12-bit ADC
- Suitable for 5k - 100k potentiometer
- Up to 4 crescendo channels can be used simoultanously
-
ALTERUS Crescendo option enable (single channel) -
ALTERUS pushbutton is a circle button with integrated yellow LED diode. Avalible in different diameters from 8 to 16 mm (drilling hole). Transparent cover enables simple inserting of printed text or graphics. Integrated LED is bidirectional which means, that it can be connected in any way regarding to polarity.- Contacts configuration: COM/NO/NC
- Max. switching voltage: 50 VDC
- Max. switching current: 250 mA
- LED voltage range: 6 - 28 VDC, bidirectional
-
Large set consists of- 1x ALTERUS main computer
- 1x Crescendo option
- 1x Reeds disable option
- 1x Matrix keyboard
- 9x ALTERUS OUT24
- 6x ALTERUS IN24
-
Small set consists of- 1x ALTERUS main computer
- 1x Crescendo option
- 1x Reeds disable option
- 4x ALTERUS OUT24
- 4x ALTERUS IN24
-
Small set consists of- 1x ALTERUS main computer
- 1x matrix keyboard
- 2x ALTERUS OUT24
- 2x ALTERUS IN24
-
ALTERUS Drawstop solenoid is electromagnetic drawstop which enables high pull and push force over the whole movement distance. We achieved this using unique design with neodymium magnets and special design. ALTERUS OUT24 can control such magnets directly, but for 3rd party controllers drawstops can also be equipped with control electronics, which is controlled via digital 1/0 signal.- Travel 25 mm
- Min. force at 12 V: 2,0 N (3 W)
- Min. force at 18 V: 2,3 N (7 W)
- Min. force at 24 V: 4,0 N (12 W)
- Output type: reed
- Magnet control type: push-pull (2 contacts; reverse polarity)
- Suggested pulse length: 100-250 ms
-
ALTERUS singleSENSE optical sensor is a sensor to detect keyboard keys or other moving parts.- 1 channel, pull-up or pull-down logic (resistor configurable)
- Max. 10 mA output load
- 4,5 - 5,5 VDC power supply
-
Alterus KEY is a dedicated module to connect organ keyboard keys (directly or through singleSENSE sensors). Over CAN-BUS network it communicates with OUT24 modules, which directly control solenoids.- 64 input channels (5-30 V)
- Powerful ARM processor
- CAN-BUS interface
- 10-30 VDC supply
-
Main computer, which controls all ALTERUS modules in the system*.- Powerful ARM processor
- integrated graphical OLED display
- USB socket
- Matrix keyboard (4x4) connector
- CAN-BUS interface
- Integrated 10-30 to 5V5 VDC power supply
- 2x analog input for crescendo (12 bit)
- 10x digital general inputs
- 12x digital general outputs
-
Alterus IN24 module is a stackable module with 24 galvanically isolated inputs.- 24 galvanically isolated and protected inputs
- LED indication on all channels
- Possible triggering to GND or VCC (selectable)
- CAN-BUS interface
- DIN-mount with stackable connectors
- 10-30/5V5 VDC supply
-
ALTERUS OUT24 is a stackable module with 24 outputs to control solenoids, lights, LEDs and other loads.- 24 push-pull outputs
- Short circuit, reverse polarity and over temperature protection
- Peak current 2 A per channel and 15 A per module
- LED indication on all channel
- Possible output type GND or VCC (push pull)
- CAN-BUS interface
- DIN-mount with stackable connectors
- 10-30/5V5 VDC supply
